The DetectaGas DG2 is specificly designed to allow safe testing of domestic Carbon Monoxide detectors. DetectaGas CO detector test gas quickly and safely tests CO detectors. It is the ONLY universal domestic CO alarm test kitwhich will test all alarms manufactured to BS EN 50291/2 (UK & Europe)

Carbon Monoxide is invisible and deadly. Install a CO alarm and regularly perform a CO alarm test to check that both its battery and gas sensor is working to protect you and those around you. Every bit as important as a smoke alarm, the early warning of a properly installed and regularly tested CO alarm can give you can make the difference between life and death.

The sensor in a CO alarm lasts around five years and many of the alarms already installed in the UK are over 5 years old. The test button on a CO alarm does not fully test the sensor with carbon monoxide nor does it prove that contaminated air is reaching the sensor via the casing vents, it only tests the battery and buzzer. Several independent reports have stated failure rates in CO alarm sensors which were less than a few years old. Most CO alarms are supplied with up to a ten year warranty, however pressing the test button will indicate the alarm is working when in fact it may not be.

• Supplied in 400ml (11 calibrated tests)

• Simple to use

• Entirely safe

• Sensor inclusive test

• Calibrated test gas

• 11 tests per can

• Low cost per test

• Sensor tests all CO alarms manufactured to BS EN 50291 & UL 2034

• it is the ONLY universal domestic CO alarm test kitwhich will test all alarms manufactured to BS EN 50291/2 (UK & Europe)