Fike 803-0010 Sita Addressable Conventional Zone Module

The Fike 803-0010 Sita Addressable Conventional Zone Module provides a single input connection to monitor conventional type fire detection devices.

It can be used to monitor external conventional detection devices such as beam detectors, smoke/heat detectors, duct detectors, etc.

Head removal monitoring is provided for when used with devices fitted with suitable base diode (utilising a 10 to 22μF End Of Line (EOL) capacitor).

The module is designed with a single colour red LED to indicate the zone status; continuous RED indicates that the input has been activated. Power for the conventional zone can be taken directly from the loop or via the addition of an external 24V DC PSU.

Short circuit isolators are also built into the device in order to protect the system in the event of a cable fault. This module is compatible with Fike’s Sita200plus, Duonet and Quadnet intelligent control panels.

Its operating parameters are configured using the panel’s programming software and are stored within the EEPROM in the device. This on-board intelligence allows each module to report and respond directly to the control panel without having to wait until it is polled.

This enhanced digital protocol means less information is needed to be sent between the device and the host control panel, resulting in faster, more reliable communication.

• Monitors a single conventional zone

• 20mA maximum

• EOL devices included