Apollo XPA-CB-12034-APO | Xpander Smoke Detector And Mounting Base

Apollo XPA-CB-12034-APO XPander smoke detectors connect via an XPander radio interface to a fire alarm panel using the Apollo XP95 protocol.

It communicates with the control panel using the Apollo addressable two-wire power and communications system.

Detectors report normal, pre-alarm, fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring.

The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol.

Apart from normal and fire the bases can send pre-set analogue values to indicate low battery, detector contaminated, detector tamper and low signal strength fault conditions.

The XPander Optical Smoke Detector complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described in the datasheet.

• Apollo XPA-CB-12034-APO

• Wireless smoke detector and base

• Wireless addresses seen by control panel as normal addresses

• Radio base with wireless circuitry and battery compartment

• Chamber designed to inhibit dirt penetration and thus reduce false alarms

• Automatic drift compensation with DirtAlert warning

• Algorithms for transient alarm rejection

• FasTest reduces time taken to test detectors

• Remote test facility

• 3-5 years battery life using AA batteries (batteries suppplied)