• Hochiki protocol

• Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB)

• Full compatibility with Hochikis ESP and Apollos XP95/Discovery protocols (dependent on model purchased).

• Two independently programmable conventional sounder circuits

• Two programmable inputs

• Fault output relay and three programmable relay outputs with voltage free changeover contacts

• Selection of zone dependency/coincidence functions

• Day/night (building occupied/unoccupied) function

• Investigation delay period function

• Phased evacuation facility

• Alarm counter that records how many times the panel has been in alarm state

• Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10ma Sounders per loop

• Integral EN54-4/A2 switch mode psu

• two-wire RS485 network

• Adjustable contamination levels

• Earth fault monitoring Combined keypad / keyswitch entry to Access Levels 2 and 3

• 999 event monitoring

• An intuitive Windows based upload-download PC program

• Optional flush-mounting stainless steel enclosures

Approvals/certificationsCertified to EN54-2 & 4 by the LPCB.Protocol/compatibilityHochiki ESP.Mains supply230V 50/60Hz.Mains rated current680mA maximum.Internal power supply27Vdc nominal.Total output current limited to3A @ 230Vac (Imax.A 250mA; Imin. 70mA).Quiescent current80mA (loop unloaded).Max battery size and type2 x 12V 7Ah VRLA connected in series.No. of loop drivers1.Max. loop output current500mA (25V min; 34V max).Max. loop length1KM.Max. addressable devices per loop126.No. of conventional sounder circuits2 (Max. length per circuit is 500m).EOL resistor value6800 5% Tol. 0/25W (blue, grey, red, gold).Max. sounder output current400mA.Auxiliary relays3 x Programmable Relays (programmable from C&Es). 1 x Fault Relay (active when no faults are present). Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc.Other outputs24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA.Auxiliary inputs2 x Programmable Inputs (programmable from C&Es). Connect to 0V to trigger, Max. input voltage 27V (non-latching).PC connectionPC connection via RS232 molex connector (supplied in XFP507 upload/download software kit); No printer connection available.Indicators2 line x 40 character backlit display; 32 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; System Fault.ConnectionsFixed, largest acceptable conductor size 1mm2.Expansion connections2-wire RS485 non-redundant network/repeater connection available via optional AFP711 network card. Max. 8 mains per network or 8 repeaters per non-networked main. Limit 1KM (main panel network) or 500M (repeater network).Product dimensions (mm)410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid).Construction & finishMetal.IP RatingIP30.Weight4.5kg