The evolution 1 control panel offerscomplete compatibility with the awardwinning range of Nittan evolution detectionand alarm devices and has been designedwith the needs of both installer and enduser in mind.

For ease of use it comes complete witha 4.3 inch touch screen display plus anintuitive and easy to use menu structure.Complex cause and effect matrix can beset up via the onboard touch screen andmenu structure or using the PC tools anddownloaded to the panel.

The clean cut, classic lines of the ABSenclosure make it attractive yetunobtrusive for the end user, with acompletely removable front cover toimprove installer access for cablingand termination.

Flexible architecture means everythingfrom a single stand alone panel, to a 16panel network, can be achieved withoutany additional hardware.Use of the Nittan Portal will allow remoteaccess and interaction via multiple levelsof secure password protection.

• 4.3 inch touch screen

• Easy to use configurationsoftware

• Full cause and effectprogramming at Panel orPC Configuration tool

• Up to 254 devices on the loop

• 254 zones available

• Network Card built in fornetworking up to 16 panels

• Remote Access via the NittanPortal (Future Development)

• 2 x configurable RS485 ports

• Up to 8 passwordprotected users

• Switch mode power supply

• EN 54 part 2 and part 4

Specification

• Part Number: F12-83101

• Mains supply: 230V AC (+10% / -15%) a@ 50/60 Hz

• System Voltage: 24V DC (Nominal)

• Loop Current: 500 mA

• Sounder Output: 2 x 200 mA @ 24V DC

• Fault Relay: 1x Volt Free Relay, SELV @ 1A Max

• Loop Capacity: Up to 254 devices per loop

• Charger Voltage: 27.6 V DC

• Battery Cut Off: 0.9 ohm

• Enclosure size: W 370 mm x H 311 mm x D 113 mm

• Weight: 2.7 kg without batteries (7.35kg with batteries)

• Max Battery space: 2x 7.0 Ah, 12 V DC sealed lead acid